APM Current&Voltage Sensors For APM2.5/2.6/2.8 PX4 Flight Control 3 In 1

APM Current&Voltage Sensors For APM2.5/2.6/2.8 PX4

Online Shopping APM Current&Voltage Sensors For APM2.5/2.6/2.8 PX4 Flight Control 3 In 1 Description:Item Name:APM Current&Voltage Sensors Voltage Input:2S-6SVoltage Sampling: 10/1Output sub-line: 6-wayBEC Output: 5.3V / 3A (PWM switching)Installation pitch: 45mm x 45mmExternal dimensions: 50mm x 50mmUsage:for APM2.5/APM2.6/APM2.8/PX4 Flight Control Features:Integration of galvanometer,UBEC,sub panels as a function of APM current&voltage sensorsCompatible with APM2.5/APM2.6/APM2.8/PX4 Flight ControlPCB using double-sided 3 times copper immersion gold process,excessive current is stable and reliableThe onboard 5.3V / 3A switching power supply UBECCurrent and voltage sampling circuit compatible 3DR galvanometer, without calibration, you can connect flight control and simple settings then it can be used Using methods:Board marked B +, B- is to connect the battery input terminal,the output terminal is six pairs of pads arranged side by side,respectively + – as a standard for welding ESC power lines.Make sure that the correct welding.Galvanometer connect with APM through a 6PIN signal cable,APM terminal please insert labeled PM’s 6 hole socket,and unplug the JP1 jumper cap.Prevent galvanometer power supply and power transfer in parallel which is not allowed, unless your ESC does not have BEC output.Special Note: Compatible with standard version APM,please pay attention to the line sequence of APM and distributor wiring board.After connecting,set the current&voltage sensors in the following photo in the MP then it can be used.Package Included:1 x 3 in 1 galvanometer board1 x 15cm 14AWG red silicone cord1 x 15cm 14AWG black silicone cord1 x XT60 battery connector plug(1 pair)1 x 6PIN power supply signal line(1 set)1 x Heat Shrink Tubing(1segment) amazon 60% off Shopping | Glasses, cameras, dress, cloth, watches, shoes, baby dress party dress

£10.65

Buy Now

Product Description

Online Shopping APM Current&Voltage Sensors For APM2.5/2.6/2.8 PX4 Flight Control 3 In 1 Description:Item Name:APM Current&Voltage Sensors Voltage Input:2S-6SVoltage Sampling: 10/1Output sub-line: 6-wayBEC Output: 5.3V / 3A (PWM switching)Installation pitch: 45mm x 45mmExternal dimensions: 50mm x 50mmUsage:for APM2.5/APM2.6/APM2.8/PX4 Flight Control Features:Integration of galvanometer,UBEC,sub panels as a function of APM current&voltage sensorsCompatible with APM2.5/APM2.6/APM2.8/PX4 Flight ControlPCB using double-sided 3 times copper immersion gold process,excessive current is stable and reliableThe onboard 5.3V / 3A switching power supply UBECCurrent and voltage sampling circuit compatible 3DR galvanometer, without calibration, you can connect flight control and simple settings then it can be used Using methods:Board marked B +, B- is to connect the battery input terminal,the output terminal is six pairs of pads arranged side by side,respectively + – as a standard for welding ESC power lines.Make sure that the correct welding.Galvanometer connect with APM through a 6PIN signal cable,APM terminal please insert labeled PM’s 6 hole socket,and unplug the JP1 jumper cap.Prevent galvanometer power supply and power transfer in parallel which is not allowed, unless your ESC does not have BEC output.Special Note: Compatible with standard version APM,please pay attention to the line sequence of APM and distributor wiring board.After connecting,set the current&voltage sensors in the following photo in the MP then it can be used.Package Included:1 x 3 in 1 galvanometer board1 x 15cm 14AWG red silicone cord1 x 15cm 14AWG black silicone cord1 x XT60 battery connector plug(1 pair)1 x 6PIN power supply signal line(1 set)1 x Heat Shrink Tubing(1segment) amazon 60% off Shopping | Glasses, cameras, dress, cloth, watches, shoes, baby dress party dress